Scienzo Sdn Bhd is a nitrogen evaporator supplier in Malaysia offering the Ashmar Automatic Nitrogen Evaporator for laboratories that need a more controlled way to concentrate multiple samples. We help QC, R&D and testing laboratories assess product suitability, arrange installation and training, and maintain the equipment through structured after-sales support.
An automatic nitrogen evaporator is suitable for laboratories that need to remove solvent and concentrate several samples under controlled conditions. It is especially relevant when repetitive manual handling is slowing the workflow or making process consistency harder to maintain.
The system works by directing nitrogen toward the sample surface while controlled heating supports evaporation. The correct setup must be matched to the laboratory's real method rather than selected only by instrument size or headline capacity.
At Scienzo, we first review what you are processing, how many samples you handle and what vessels you use. This helps us determine whether the Ashmar Automatic Nitrogen Evaporator is an appropriate fit for your workflow.
Your laboratory should consider a nitrogen evaporator when sample preparation involves repeated solvent reduction across multiple vessels and the process needs better control, repeatability or operator efficiency. The application should still be reviewed for solvent behaviour, analyte sensitivity and required final volume.
Multiple samples must be concentrated as part of a routine QC, R&D or testing method.
Operators currently adjust gas flow, heat or sample position manually, making the workflow difficult to standardise.
Skilled laboratory staff spend too much active time supervising a repetitive concentration step.
The laboratory needs clearer operating parameters for method documentation and operator training.
A nitrogen evaporator is not automatically the right choice for every solvent-removal task. Large-volume evaporation, solvent recovery requirements, highly volatile analytes or methods requiring vacuum control may call for a different approach. We assess these conditions before recommending equipment.
The correct setup is determined by the complete sample preparation method, not by sample capacity alone. A supplier should understand the vessels, solvents, throughput, heating conditions, endpoint and laboratory utilities before preparing a recommendation.
| Selection factor | Why it matters | Information to provide |
|---|---|---|
| Daily sample volume | Determines whether the working capacity can support routine batches without creating a bottleneck. | Samples per batch, batches per day and expected future demand. |
| Vessel format | The rack, holder and gas-delivery position must suit the outside diameter, height and working volume of the vessel. | Vial or tube type, dimensions and fill volume. |
| Solvent and matrix | Solvent volatility, material compatibility and laboratory safety controls affect how the method should be configured. | Solvent names, mixtures, sample matrix and safety data. |
| Temperature requirement | Heat can support evaporation, but unsuitable settings may affect sensitive compounds or method performance. | Current method temperature and acceptable operating range. |
| Final endpoint | Concentrating to a remaining volume is different from taking a sample to dryness. | Required final volume, dryness requirement and acceptable supervision level. |
| Nitrogen supply | The laboratory must have a suitable, regulated gas source and connection arrangement. | Available gas source, pressure control and intended installation location. |
| Ventilation | Evaporated solvent must be managed according to the method and the laboratory's safety controls. | Fume hood availability, room layout and applicable internal procedures. |
The lowest equipment price does not confirm that the evaporator will fit your vessels, method or laboratory utilities. An unsuitable unit can create extra handling, inconsistent endpoints, difficult installation or unplanned accessory purchases.
Before comparing quotations, check whether each supplier has addressed the same scope:
Scienzo prepares its recommendation around your stated application. This allows you to compare the complete operational requirement rather than comparing incomplete equipment prices.
Our process starts with an application review and continues through selection, quotation, installation guidance, training and after-sales support. This gives your laboratory a clear path from initial enquiry to routine operation.
Tell us your sample type, solvent, vessel dimensions, batch volume, desired endpoint and current workflow.
We review whether the automatic nitrogen evaporator suits the method and identify the supporting requirements that should be considered.
We prepare a product recommendation and quotation based on the available application information and required support scope.
Our technical team supports equipment installation and trains your operators on the supplied system and routine operating considerations.
The supplied equipment is supported by a two-year warranty and two years of after-sales service, including one preventive maintenance visit per year.
Send us your vessel dimensions, sample count, solvent details and required final volume. We will review the application and prepare a suitable product recommendation and quotation.
Request a quotation View the automatic nitrogen evaporator
At Scienzo, we supply specialised scientific solutions to laboratories and organisations throughout Malaysia. Established in 2021, we are headquartered at Taman Perindustrian Teknologi Tinggi Subang in Subang Jaya, Selangor.
Our range includes laboratory equipment, laboratory automation, analytical instruments, chromatography consumables, laboratory glassware, HPLC vials and caps, and safety and environmental monitoring equipment. We support QC and R&D laboratories, testing operations and customers planning new laboratory equipment purchases.
We focus on understanding the actual requirement before proposing equipment. You can also explore our broader laboratory automation solutions when your project involves more than one manual sample-preparation step.
Scienzo combines equipment supply with technical assistance so your purchasing decision includes support beyond delivery. Our stated service package includes a two-year warranty and two years of after-sales service with one preventive maintenance visit per year.
Our technical personnel also support equipment installation and user training. Scienzo has certified engineers for service and repair work involving Casella and Infitek equipment; service capability for any specific product should be confirmed in the quotation and agreed support scope.
You can review additional company activities in our project and training gallery.
We support enquiries from laboratories across major industrial and research regions in Peninsular Malaysia, Sabah and Sarawak. Our headquarters is in Subang Jaya, Selangor; coverage does not imply that Scienzo operates a physical branch in every listed state.
These answers cover the main information laboratories should prepare before requesting a nitrogen evaporator quotation.
Tell us what you need to concentrate, the vessels you use and your daily sample volume. Our team will review the application and provide a product recommendation, proposed support scope and quotation for your laboratory.
Discuss your application Explore laboratory automationSales and technical enquiry: +6011-3300 7987 | Email: sales01@myscienzo.com
Scienzo Sdn Bhd provides laboratory supplies, scientific instruments, and environmental monitoring equipment in Malaysia. Trusted solutions for various industries since 2021.
